If you can’t find steel screws in your home center or sawmill, contact suppliers aimed at builders (see Yellow Pages under “Drywall Equipment and Accessories”). Structural frame is the construction of levels and walls made of steel components. The metal bolt frame consists of two main components: the bolt and the rail. For load-bearing walls and for structural applications such as exterior walls, heavy metal screws should be used. However, non-load-bearing structures such as partitions, half walls and interior walls can be constructed with metal screws of a lighter caliber. Over the past 100 years, builders have used high-profile metal and traditional wood screws to frame load-bearing walls.
These components can fit together in any way, both for large architectural projects and for small custom projects. Because the frame connections are modular, projects can be easily dismantled and adapted to the next ones without wasting material. The solution is as simple as loosening some screws, adjusting the height and tightening again. The T-Groove extruded aluminum frame is a fairly simple frame concept that uses a “T” shaped groove or channel, so you can connect extruded aluminum profiles modularly without having to weld.
These methods save energy and reduce condensation and provide proven performance over the lifetime of the building. The thermal performance of a frame system is less effective when the aluminum is bonded to the unconditioned outer material in the conditioned space. In cold climates, aluminum acts as an ice cube in your building and requires more energy to control the indoor temperature. This makes the type of frame system and the performance of this system critical when considering the energy efficiency of a building. In the past, aluminum frame systems were known for their high thermal conductivity or susceptibility to heat gain and loss.
If a functional change is needed to adapt to the changing needs of your business, you need to buy more steel and make the new solution. The extruded aluminum frame cannot be magnetically charged, making it the material of choice in high-voltage configurations and electrical applications. The extruded aluminum frame is suitable for combustible environments and around explosive materials. Like doors, cabinets and other heavy objects need additional support. You can use plywood or 2×4, but be sure to cut a curb on it to accept the lip on the inside of the screw. If you don’t, this bolt lip presses against the support board and turns the screw, creating an arc on the wall.
It has been called “adult erector mounting” and uses a similar concept, but instead of nuts and screws, special connectors are used that slide into the “t” slot and connect the aluminum frame together. Looking only at the frame system, studies show that a metal screw frame system can cost 15 percent more than wooden bolt frame systems. 80/20 aluminum frame systems often save you hundreds of dollars compared to welding steel frames. When comparing the two alloys, the cost of steel compared to aluminum is one of the most important factors in determining which materials to use for a work. Affordable tooling costs make the development of a custom aluminum extrusion mold or aluminum profile surprisingly economical. Unlike wooden bolts, the owner can’t just hammer a nail into a wooden bolt to hang a painting, mirror, or TV arm.
Steel screws do not deform and are immune to water damage, termite infestation. Steel is also more environmentally friendly because there is no need to cut down trees. Depending on individual T-Slot Aluminum Extrusion requirements, the extruded aluminium frame can be configured exactly. Shipping and handling costs for extruded aluminum frames are significantly lower than for heavy metal manufacturing.